How To Use : Step 1: Cut the pattern close to the design. Step 2: Gently remove the clear sheet. Step 3: Dip the white sheet in water in a flat bowl for 10 to 15 seconds with the design facing upside down and hold it from curling. Step 4: Pick the sheet from water and place the wet sheet in upside down manner on the clean surface to be transferred on. Step 5: Gently dab the sheet against the surface with a damp sponge and carefully slide the white sheet from the film. Do not touch the transferred film with your hands and let it dry for some time. Step 6: Seal the transfer with acrylic varnish or any good sealer. In case of big sheets please peel the film and stick it directly on the surface and then apply water from the back. After that follow from step 5 onwards. For the best results and protection varnishing is a MUST. Note: Sometimes the sheets might have some air bubbles but it's absolutely fine.. as it wont affect the results. Please let it dry for some time and it will settle down and if it doesn't please use the brush to flatten it up.